Jacket Cressi Aquawing Plus

Jacket Cressi Aquawing Plus

AQUAWING PLUS is an interesting proposal for a wing with a robust but at the same time lightweight construction (2.90 kg) and a low transport volume, all the advantages of the wing system but with interesting contributions proposed by Cressi for harness and ballast systems.

Characteristics

• Other, not further worked than hot-rolled (13.3 kg lifting capacity), designed to ensure perfect buoyancy and stability.
• Fabric of the wing Cordura 1500 D with internal chamber in Nylon 210 D with internal injection of polyurethane.
• Harness system M.A.S. (Modular Adjustment System) Patented: A single 50 mm belt runs over the shoulders, armpits and waist and allows the wing to be adjusted and loosened comfortably and flexibly in any situation and guarantees absolute fixation during use. Its ability to regulate allows unifying the cutting to one.
• Its pattern and layout make it 100% unisex with complete freedom of the breast area and harness completely independent of the sack, provides a absolute stability of the wing the diver and completely relieves pressure on the pectoral, axillary and abdominal areas due to expansion of the sack towards the dorsal area and around the bottle.
• Shoulder straps and plate covering with comfortable padded lining made of a closed-cell material which prevents the accumulation of water or air and therefore does not affect the buoyancy inherent in the vest and facilitates rapid drying. Especially with lightweight suits.
• Anodised light alloy plate reduces the total weight of the assembly (2,9 kg total) while ensuring stability and safety in use. Machining of eyelets for passing the belt at 45o. Ballast integrated into the back of the plate will be available soon.
• Integrated ballast carrier system, directly mounted on the plate in order to ensure that this rate is set to maintain stability during the dive and not to impair the ballast pocket management task.
• Two ballast compartments anchored to the bottle belt.
• Other, of circular cross-section.
• Support area of the thermoplastic rubber bottle integrated to ensure perfect bottle positioning and stability.
• Rear compartment designed to house the signalling buoy.
• Direct system inflator: Metallic filter at the air intake under the stem and cylindrical around the valve. Very sturdy body and attractive design. Inflation rate recalibrated, 50% higher. Sandproof design with minimized mouthpiece nozzle. Pulser with wide gaps in its seat to prevent the blocking action of sand grains. Emptying pusher with airtightness by outside washer. New very tough trachea with very progressive curvature. Includes whip-guide forceps. +Info
• For the purposes of this Regulation, the following definitions shall apply: with an anti-return membrane that prevents accidental water entry.

Specifications

• Fixing tape to the tap
• 5 D-rings of stainless steel
• M.A.S. (Modular adjustment system)
• In the case of vehicles of categories N1 and N2, the maximum authorised mass of the vehicle shall not exceed:
• Inner chamber Nylon 210 D with inner laminate of polyurethane
• Single size (XS / XL)
• Longitudinally moving wing.
• 2 back lead pockets in the bottle cap
• Harness 100% independent of the sack
• Capacity of lift (measured according to EC rules): 13,3 NW / 29,3 L
• Weight in kg: total weight 2,90 kg - 6,39 L